Shelves and racks are compatible in all configurations, but it is recommended to use shelves and racks of the same series; rib reinforcements are suitable for all types of MS series shelves (Standart, Strong, Hard).
Shelving office series MS STANDART (MS 500).
- designed for storing documents and various cargoes in the office, warehouse, archive;
Racks:
- racks with a reinforced angular profile of complex section 30x30 mm,
- collapsible rack
- two types of rack and shelf reinforcement: L-shaped, assembly is carried out using threaded fasteners (bolts and nuts), and T-shaped, assembly without nuts. (Shelving kits are assembled with bolts, no nuts).
Shelves:
- Shelf MS evenly distributed load per MS shelf 100 kg.
- the use of L-shaped amplifiers increases the load on the shelf by 15%;
- the use of T-shaped amplifiers increases the load on the shelf by 50%;
- the use of shelf rib reinforcements increases the load on the shelf by 60% (it is recommended to start installation from the bottom shelf);
- height of the side edge of the shelf - 33 mm;
- shelf height adjustment step – 25 mm;
| MS shelf | Influence of fasteners on the maximum load capacity of one shelf, kg * | |||
|---|---|---|---|---|
| without L-image. corners | with L-image. corners (+ 15%) | with T-shape. corners (+50%) | with shelf rib reinforcement (+60%) | |
| 70x30/40/50/60 | 100 | 115 | 150 | 160 |
| 100x30/40/50/60 | 100 | 115 | 150 | 160 |
* The increase in loads is not cumulative. (When installing shelf rib reinforcements with T and L-shaped corners, the load on the shelf does not increase in total, but is determined by the maximum value
Rack:
- maximum load on the rack as standard (the upper and lower shelves are attached through L-shaped amplifiers, the rest of the shelves directly to the rack) using MS Standart racks - 500 kg.
- the use of an additional set for one shelf L-shaped or T-shaped corner increases the load capacity by 10%;
- the use of L-shaped amplifiers on all shelves increases the load capacity by 20%;
- the use of T-shaped amplifiers on all shelves increases the load capacity by 50%.
- two types of thrust bearings: plastic support or adjustable metal ones (when adjustable thrust bearings are installed, the load is reduced to 400 kg, it is impossible to increase the load capacity due to the use of amplifiers);
- color: gray semi-gloss (RAL 7038); - type of coating: powder.
| Rack | Influence of fasteners on the maximum load capacity of the rack, kg | |||||
|---|---|---|---|---|---|---|
| L-image. corner kits (on the top and bottom shelf) | L-image. corner kits (on the top and bottom shelf + in the middle)(+10%) | with L-image. corner sets on all shelves)(+20%) | T-shaped corner kits (on top and bottom shelf)(+15%) | T-shape. corner kits (on the top and bottom shelf + in the middle)(+10%) | with T-shape. corners (on all shelves)(+50%) | |
| Standard MS | 500 | 550 | 600 | 575 | 600 | 750 |
For your safety!!!:
- Free-standing shelving must be bolted to a load-bearing wall.
- When using racks with a height of more than 2000 mm, at least three shelves (lower, middle, top) must be reinforced with L-shaped rack fasteners.
- The load on the shelves must be evenly distributed. Load the rack sequentially, starting from the bottom shelf.
- It is recommended to use fastening of rows of racks among themselves.
- It is recommended to start the installation of shelf rib reinforcements from the bottom shelf.
